← All peptidesHealingKLOW (GHK-Cu 50 mg + BPC-157 10 mg + TB-500 10 mg + KPV 10 mg)
Combined regenerative and anti-inflammatory peptide blend research:
Once-daily subcutaneous protocol for combined regenerative and anti-inflammatory peptide research. KLOW is a multi-peptide blend combining TB-500 (10 mg), BPC-157 (10 mg), KPV (10 mg), and GHK-Cu (50 mg) for a total of 80 mg per vial. TB-500 promotes wound healing, angiogenesis, and tissue repair; BPC-157 supports tendon, ligament, and gut repair; KPV adds NF-kB-mediated anti-inflammatory support; GHK-Cu drives collagen synthesis and skin remodeling. This educational protocol presents a once-daily subcutaneous approach using a practical dilution for clear insulin-syringe measurements.
Get KLOW → code PROFITProtocol Overview
Concise summary of the regimen.
GoalCombined tissue repair, inflammation control, and skin/GI support through four complementary peptides: cell migration and angiogenesis (TB-500), localized repair (BPC-157), anti-inflammatory signaling (KPV), and collagen synthesis (GHK-Cu).
ScheduleDaily subcutaneous injections for 8 to 16 weeks with gradual titration, followed by a 2 to 4 week rest period.
Reconstitution3 mL per 80 mg blend vial (~26.67 mg/mL total).
StorageLyophilized vials frozen; reconstituted solutions refrigerated; use within 4 weeks.
Dosing & Reconstitution
| WEEK | DAILY DOSE (PER COMPONENT) | UNITS PER INJECTION |
|---|
| Weeks 1 to 2 | TB-500: 250 mcg / BPC: 250 / KPV: 250 / GHK-Cu: 1.25 mg | 7.5 units (0.08 mL) |
| Weeks 3 to 4 | TB-500: 500 mcg / BPC: 500 / KPV: 500 / GHK-Cu: 2.5 mg | 15 units (0.15 mL) |
| Weeks 5 to 8 | TB-500: 750 mcg / BPC: 750 / KPV: 750 / GHK-Cu: 3.75 mg | 22.5 units (0.23 mL) |
| Weeks 9 to 12 (Maintenance) | TB-500: 500 mcg / BPC: 500 / KPV: 500 / GHK-Cu: 2.5 mg | 15 units (0.15 mL) |
Frequency: Inject once daily subcutaneously. This schedule follows a conservative titration to assess individual response. For 10 unit (0.10 mL) or smaller administrations, consider 30- or 50-unit insulin syringes for improved readability.
Reconstitution Steps
- Draw 3 mL bacteriostatic water with a sterile syringe.
- Inject slowly down the vial wall to minimize foaming.
- Gently swirl or roll the vial until fully dissolved (do not shake vigorously).
- Label with reconstitution date and refrigerate at 2 to 8 °C, protected from light.
- Use within 4 weeks for optimal potency and safety. Syringe math: at ~26.67 mg/mL total, TB-500, BPC-157, and KPV are each at 3.33 mg/mL (33.3 mcg per unit) and GHK-Cu at 16.67 mg/mL (166.7 mcg per unit); 1 unit = 0.01 mL » 33.3 mcg each of TB-500, BPC-157, KPV + 166.7 mcg GHK-Cu on a U-100 insulin syringe.
Storage Instructions
Proper storage preserves peptide quality.
- Lyophilized: store at -20 °C or below for long-term stability (months to over a year). If freezer unavailable,
refrigeration at 2 to 8 °C is acceptable for shorter durations.
- Reconstituted: refrigerate at 2 to 8 °C at all times when not in use; do not freeze reconstituted solution;
use within 4 weeks (28 days).
- Allow frozen vials to reach room temperature before opening to prevent condensation.
- Protect reconstituted solution from light; inspect before each use and discard if discolored, cloudy, or
contains precipitate.
Supplies Needed
Plan based on an 8 to 16 week daily protocol with gradual titration.
Peptide Vials (KLOW, 80 mg each):
- 8 weeks: ~3 vials. 12 weeks: ~4 vials. 16 weeks: ~5 vials.
Insulin Syringes (U-100, preferably 0.3 mL / 30-unit for precision):
- Per week: 7 syringes (1 per day). 8 weeks: 56. 12 weeks: 84. 16 weeks: 112.
Bacteriostatic Water (10 mL bottles):
- 8 weeks (3 vials): 1 bottle. 12 weeks (4 vials): 2 bottles. 16 weeks (5 vials): 2 bottles.
Alcohol Swabs:
- Per week: 14 swabs. 8 weeks: 112 (2 x 100-count). 16 weeks: 224 (3 x 100-count).
Important Notes
Practical considerations for consistency and safety.
- Use new sterile insulin syringes for each injection; dispose in a sharps container immediately after use.
- Rotate injection sites systematically (abdomen, thighs, upper arms) at least 1 to 2 inches apart.
- Inject slowly over 2 to 3 seconds and wait a few seconds before withdrawing the needle.
- Document daily dose, injection site, and any observations to maintain consistency and track progress.
- Practice aseptic technique at every injection: clean vial stopper and skin with separate alcohol swabs,
allow to air-dry completely.
How This Works
Mechanisms of action.
KLOW combines four peptides with complementary mechanisms of action. TB-500 (Thymosin Beta-4) promotes angiogenesis, cell migration, and tissue repair by regulating actin. BPC-157 is a gastric pentadecapeptide that supports tendon, ligament, and muscle healing through enhanced angiogenesis and growth factor modulation. KPV is a C-terminal tripeptide fragment of a-MSH with potent anti-inflammatory properties: it inhibits NF-kB signaling and reduces pro-inflammatory cytokines without melanotropic effects. GHK-Cu is a naturally occurring copper peptide that stimulates collagen and elastin synthesis, promotes wound healing, and modulates gene expression related to tissue remodeling.
Benefits & Side Effects
Observations from preclinical and early-stage research.
- Accelerated tissue repair and wound healing through multiple complementary pathways.
- Reduced inflammation via NF-kB inhibition and cytokine modulation.
- Enhanced collagen synthesis and connective tissue support.
- Promotion of angiogenesis and improved blood flow to healing tissues.
- Potential support for musculoskeletal recovery and joint health.
- Mild injection-site reactions (redness, irritation) may occur with subcutaneous administration.
- Occasional lightheadedness reported with some peptides due to vasodilatory effects.
- Limited human clinical data; most safety observations derive from preclinical studies.
Lifestyle Factors
Complementary strategies for best outcomes.
- Maintain adequate protein intake (1.6 to 2.2 g/kg body weight daily) to support collagen synthesis and
tissue repair.
- Implement progressive resistance training and appropriate activity modification based on healing goals.
- Prioritize sleep quality (7 to 9 hours nightly) as the primary recovery window for tissue regeneration.
- Manage stress through evidence-based techniques to support an optimal healing hormonal environment.
- Stay well-hydrated and ensure adequate micronutrient intake, particularly vitamin C, zinc, and copper.
Injection Technique
General subcutaneous guidance from clinical best-practice resources.
- Clean the vial stopper and skin with alcohol; allow to dry.
- Pinch a skinfold; insert the needle at 45 to 90 degrees into subcutaneous tissue.
- Do not aspirate for subcutaneous injections; inject slowly and steadily.
- Wait 5 to 10 seconds before withdrawing; dispose of syringe in sharps container.
- Rotate sites systematically (abdomen, thighs, upper arms) to avoid lipohypertrophy.
References
Source citations for further reading.
- Philp D et al. Thymosin beta 4 accelerates wound healing (1999).
- Emerging Use of BPC-157 in Orthopaedic Sports Medicine: A Systematic Review (HSS Journal, 2025).
- PepT1-mediated tripeptide KPV uptake reduces intestinal inflammation (Gastroenterology).
- Pickart L. Regenerative and Protective Actions of the GHK-Cu Peptide in Light of New Gene Data (Int J Mol Sci, 2018).
Educational and research reference only. Not medical advice. For research use only; not for human consumption.